Sanding Wood Chair Legs

Apply two coats sanding in between with 200 grit or higher sandpaper after the first coat. Don t use coarser grades at all. When all the finish is removed and most of the citristrip is scraped off it s time to clean your furniture to remove the last of the residue.

woodsmith adirondack chair plans wooden outdoor rocking chair plans woodshop workbench design wooden furniture legs london wooden patio chair plans free wooden high chair baby doll wooden glider bench plans wooden lawn chair plans

View This Quick Video Tip Demonstrating How To Smooth Out Grooves

Farm Table Top Was Sanded And Re Stained Dark And Legs Painted

Chair Leg Collection Replace Old Chair Legs Perfect For Chairs

These Are Perfect For Sanding Spindles Chair Legs Fine Details

One More Day Of Making Big Scratches Smaller Wood Woodworking

Refinished Table Sanded Down The Table Top Then Stained With

Spray with a nice even motion following the natural lines of the piece.

Sanding wood chair legs. Make sure to scrape off any excess filler or putty before letting it dry. But still there is a way to sand it perfectly. Table legs are one of the most difficult places for sanding especially for tight places and grooves. Go over the leg with 220 grit sandpaper prior to sealing or staining the wood.

How to refinish wood spindles. Stripped wood you have to work a little harder to sand legs that have residue from a previous finish. Once your last coat of stain is totally dry apply an oil based clear coat for a final layer of sheen and protection. Repeat if necessary depending on the thickness of your particular furniture s finish.

Hard sanding with coarse grit paper with or without a block can flatten or deform round parts. Use a stripping after wash and wipe it all over the chair. If there are any small scratches or dents in the chair the sanding process may eliminate them without having to use any wood filler or putty. How to sand spindle table legs.

To sand round parts cut narrow strips of fine grit grades 5 0 and 6 0 sandpaper. If you can use an iron i promise you can use an electric. I like to fold the paper in half and then wrap it around the leg and move it back and forth. Narrow rungs spindles legs and other round parts need special treatment.

Spray on clear coat is easy to use and provides great coverage. Besides you need to sand it twice using 100 grit sandpaper then use the spray and then again use 180 grit sandpaper and then spray over there for the final time. Sand with a rough sanding pad now it s time to sand. Apply wood filler if needed before sanding a furniture piece check for any deep gouges cracks or dents.

Check out the best prices for sanders here. It s pretty straightforward to sand down legs. Turned spindles are common on antique chairs cabinets bed frames and staircases and an effective procedure for stripping and sanding them is required knowledge. You ll need some 80 grit sandpaper and 220 grit sandpaper cut into small pieces about 3 x 4.

Only the minimum of wood should be removed. Making sure that the sandpaper always goes around the leg with the grain and not up and down the leg. If there are still any deep scratches dents or dings in the chair after sanding it down apply a small amount of wood putty or filler to the area with a putty knife. I am so excited to report that we finally go around to refinishing these chairs because we found some amazing mohawk products that allowed us to do it without sanding or stripping the existing finish.

These chairs are high quality solid wood and are a style that is pretty hard to come by.