How To Repair Wood Chair Legs

Start by sanding the part of the chair leg that faces the furniture.

How to repair wood chair legs. Number the rungs in an ascending. In my case the chair legs had some ridges i guess you d call them that were a perfect bonding surface for the filler. Because of this the joints between the parts of a chair will sometimes come loose. If the motion exposes dowels or tenons apply glue to the exposed part of the tenon or dowel.

Disassemble the wobbly chair. Use a wet sponge to wipe the excess putty from the leg. How to disassemble a wobbly chair and reglue it step 1. This can happen where the legs join the seat where the side stretchers and cross stretchers join into each other and where they join into the legs.

Pre drill to prevent the wood from. Wood putty dries in about 30 minutes. Use fasteners for extra security. Use your finger to smooth the putty until it s flush with the leg s surface.

To mix the bondo you scoop out a golf ball sized amount of the gray stuff in the can with 1 and 1 4 inch of the red cream hardener that comes in a separate tube. Pull the legs apart if possible. Remove all traces of old glue from the mortise and tenon joints using. Label all parts with masking tape and a marker.

Fixing loose chair legs. These joints can easily be repaired. Place clamps on the parts to compress the dowel or mortise back into. Apply wood glue to the sanded parts and clamp the leg firmly in its right position.

This is meant to remove any old glue thus allowing.